Eriez’ Rare Earth Roll Separators provide an alternative in handling a wide variety of materials which do not respond well to traditional methods of processing on low intensity dry drum separators or high intensity induced magnetic roll separators.
The extremely powerful high gradient magnetic circuits in the RE Roll are at least ten times the attractive force of conventional ceramic magnets. These separators are capable of recovering particles with a wide range of magnetic susceptibility, and will handle feeds from one–half inch (13 mm) down to very fine material. Optional lower intensity magnetic materials are also available as a lower cost alternative for specific applications.
Magnetic field in excess of 21,000 gauss at the pole of the magnetic circuit
Standard 5 and 10 mils thick Kevlar belts. Optional FDA belting available
No power required for magnetic field
Standard models include single, double, and triple stage machines
Compact, modular design
Even, consistent and controllable feed to the RE Roll via an Eriez patented electromagnetic vibratory feeder
Handles wide range of particle sizes
Effectively attracts para–magnetic and very fine (minus 325 mesh) ferromagnetic materials
PRINCIPLE OF OPERATION
The continued improvement of high energy rare earth permanent magnetic materials has contributed to an unprecedented acceptance by several industries of rare earth permanent magnetic separators. The evolution of these high strength permanent magnets has led to the development of high intensity separators that operate energy-free. The Rare Earth Roll separator was designed to provide peak separation efficiency and is typically used when a high level of product purity is required. The roll's permanent magnetic discs alternating with thin steel pole pieces along a shaft. The steel poles are saturated with magnetic flux and produce a magnetic field in excess of 21,000 gauss.
The Rare Earth Roll is used as a head pulley, and a thin belt connects the roll to a Dynaloc, self cleaning tail pulley. The standard belting is Teflon coated, graphite filled KEVLAR with thickness of 5 and 10 mils. Accepted belting is also available for food and pharmaceutical applications. The belt conveys the feed material to the magnetic field or separation zone. When the feed enters the magnetic field, the magnetic and/or paramagnetic particles are attracted to the roll while the non–magnetic material follows the natural discharge trajectory. A splitter arrangement is used to segregate the two streams. Other components of the Rare Earth Roll separator include a vibratory feeder with a mounted hopper, stainless steel product discharges, TEFC gearmotor and controls. The rare earth roll separators are avail- able in single, double and triple stage versions with either non–magnetic or magnetic rerun.
The Rare Earth Roll separator has been accepted by a number of industries as the most effective magnetic separation method
for the purification of non–magnetic materials. These industries and their specific applications are listed below.
Effectively reduces the level of iron from beach sands, feldspar, silica sand, calcium carbon- ate, magnesite, kyanite, bauxite, andalusite, etc. by removing iron bearing minerals such as hematite. Magnetically concentrates weakly magnetic minerals, such as garnet, ilmenite, musovite, mica, etc.
Extremely high levels of product purity are obtained by removing the very fine iron of abrasion and iron smeared on the abrasives. Specific abrasive material treated includes aluminum oxide, silicon carbide, glass beads, tumbling media.
Iron and/or stainless steel encapsulated in pel- lets are effectively removed from the product stream. Free stainless steel and very fine iron is also removed with very high levels of efficiency.
PVC flakes can also be treated to remove iron smeared flakes from uncontaminated product.
RE Rolls are also utilized to scalp 40% to 70% of aluminum from shredded PET soda bottles that use aluminum caps.
Food and Pharmaceutical
Effectively removes rust from free flowing, granular chemicals and dehydrated vegetables.
The RE roll is capable of sorting the nickel and cobalt bearing metal turnings from titanium or zirconium metals. Other applications include removal of shredded aluminum from PET, separation of chrome from crushed automobile grills, and sorting of paramagnetic, synthetic diamonds from natural diamonds.
Glass, foundries, specialty materials and metals, electronics.
|Item Name||Part Number||Description||Price|
|Rare Earth Roll DHIMS Lab 5" (4" Diameter)||534||
• 5-inch Single Rare Earth Magnetic Roll • Single non-magnetic tail pulley, belt, adjustable splitter and frame. • 1/3 HP RPM motor 230 volt, 3 phase, 60 Hz with variable speed control. • 1-1/4 cu. ft. mild steel hopper and mild steel frame mounted on separator frame. • Eriez Model 26C Vibratory Feeder, 115V/60Hz with 4" x 20" stainless steel tray. • Unicon Feeder Control included.
|Rare Earth Roll DHIMS Lab 5" (6" Dia)||534B||
• Single Rare Earth Magnetic Roll. 5 inch magnet width. • Single non-magnetic tail pulley, belt, adjustable splitter and frame. • 1/3 HP RPM motor 230 volt, 3 phase, 60 Hz with variable speed control. • 1-1/4 cu. ft. mild steel hopper and mild steel frame mounted on separator frame. • Eriez Model 26C Vibratory Feeder, 115V/60Hz with 4" x 20" stainless steel tray. • Unicon Feeder Control included.